Binding with Fixed ID:
Only done once, and locks transmitter and receiver together. Wait for permanent red light in the recipient first. (temporary bonding)

Enter
Select “Model” with arrow keys
Enter
Select “Fixid”
Enter
Shift from off to on on with l
Click dn
A random number blinks
Ent
Ent
Run -> yes
Wait a few seconds
Ext
You have now tied up the transmitter and recipient with a unique ID.

Activate the "Mix" switch out to Aux1:

This means that you use the three-position switch "Mix" out to AUX1 on radio receiver.

Ent, go to Model, go down to type, select Aero

Reverse channels if necessary
Function
Ent
Revsw
Pupil -> fox
DN
Aile -> Rev
Ext
Ext

With throttle to 40%, you will normally land fairly quickly without crashing. You can test yourself by flying with the throttle slightly below medium and see if it sinks in height.
Function
Ent
Safe
Ent
Pupil -> Safe (0%)
Aile -> Safe (0%)
Rud -> Safe (0%)
Thro -> Safe -> L40% (Use R / L)

Expo
Used to get less impact in the middle of the plugs and thus better control. Can also be put in Cleanflight. How much Expo you use is a taste but these numbers can be a place to start.

Function
Ent
DRXP
Ent
Chann pupil


DN
Exp -> + 25 (use R / L)


Up
Chann Aile (use R / L)


DN
Exp -> + 25 (use R / L)


Up
Chann rudd


DN
Exp -> + 15 (use R / L)